Acura 2010 TL Owner's Manual page 556

Turn the ignition switch to the
START (III) position or on models
with keyless access system, press
the engine start/stop button to set
START Mode (see page 178
the headlights do not dim, check
the condition of the fuses. If the
fuses are OK, there is probably
something wrong with the
electrical circuit for the ignition
switch or starter motor. You will
need a qualified technician to
determine the problem. See
Emergency Towing on page
If the headlights dim noticeably or
go out when you try to start the
engine, either the battery is
discharged or the connections are
). If corroded. Check the condition of
the battery and terminal connec-
tions (see page
then try jump starting the vehicle
from a booster battery (see page
555 ).
570 .
The Starter Operates Normally
In this case, the starter motor's
speed sounds normal, or even faster
than normal, when you turn the
ignition switch to the START (III)
position or on models with keyless
542 ). You can access system, press the engine
start/stop button to set START
Mode (see page
does not run.
2010 TL
If the Engine Won't Start
178 ), but the engine
Are you using a properly coded
key or keyless access remote (on
models with keyless access
system)? An improperly coded key
or keyless access remote will
cause the immobilizer system
indicator in the instrument panel
to blink rapidly (see page
CONTINUED
65 ).
553