Acura 2010 TL Owner's Manual page 256

To Play an iPod
This audio system can select and
play the audio files on the iPod with
the same controls used for the disc
player. To play an iPod, connect it to
the USB adapter cable in the console
compartment by using your dock
connector, then press the AUX
button. The ignition switch must be
in the ACCESSORY (I) or ON (II)
position. The iPod will also be
charged with the ignition switch in
these positions.
The audio system reads and plays
playable sound files on the iPod. The
system cannot operate an iPod as a
mass storage device. The system will
only play songs stored on the iPod
with iTunes.
iPod and iTunes are registered
trademarks owned by Apple Inc.
Playing an iPod (Models without navigation system)
iPods compatible with your audio
system using the USB adapter cable
are:
Model Software
iPod classic
5th (Gen) Ver. 1.2 or more
(2005 or later)
iPod classic Ver. 1.0 or more
(2007 or later)
iPod nano Ver. 1.2 or more
iPod nano Ver. 1.1.2 or more
2nd generation
iPod nano Ver. 1.0 or more
3rd generation
iPod touch Ver. 1.1.1 or more
iPhone Ver. 1.1.1 or more
Use only compatible iPods with the
latest software. iPods that are not
compatible will not work in this audio
unit.
2010 TL
NOTE:
Do not connect your iPod using a
hub.
Do not keep the iPod in the
vehicle. Direct sunlight and high
heat will damage it.
Do not use an extension cable
between the USB adapter cable
equipped with your vehicle and
your dock connector.
We recommend backing up your
data before playing it.
Some devices cannot be powered
or charged via the USB adapter. If
this is the case, use the accessory
adapter to supply power to your
device.
CONTINUED
253