Acura 2010 TL Owner's Manual page 278

To Play the AM/FM Radio
STEREO INDICATOR
BAND
The power mode must be in
ACCESSORY or ON. Press the
AUDIO button to view the audio
control display. Turn the system on
by pressing the VOL/
the AM/FM button. Adjust the
volume by turning the
VOL/ knob.
Playing the AM/FM Radio (Models with navigation system)
Your vehicle has the engine start/
stop button instead of an ignition
switch. For more information on
selecting the power mode, see page
178 .
The band and frequency that the
radio was last tuned to are shown on
the display. To change bands, press
the AM/FM button. You can also
change bands by pushing the
interface selector up. Each time you
push it up, the band will change to
FM1, FM2 or AM. On the FM bands,
STEREO will be shown on the
navigation screen and ST on the
center display, if the station is
broadcasting in stereo. Stereo
knob or
reproduction on AM is not available.
On the AM band, AM noise
reduction turns on automatically.
To Select a Station
You can use any of five methods to
find radio stations on the selected
band: tune, skip (seek), scan, the
preset buttons, and auto select.
On the FM band, you can also use
the features provided by the radio
data system (RDS). For more
information on the RDS, see page
2010 TL
278 .
CONTINUED
275