Acura 2010 TL Owner's Manual page 520

Manual Transmission
Check the fluid level with the
transmission at normal operating
temperature and the vehicle sitting
on level ground.
To check the transmission fluid level,
remove the mounting bolt and the
under cover holding clips, then pull
out the driver's side under cover
carefully.
CHECK BOLT
Remove the check bolt and look for
transmission fluid coming out of the
bolt hole. If a small amount of fluid
drips out of the bolt hole, reinstall
the check bolt.
If no fluid comes out, remove the
filler bolt. Slowly add Acura Manual
Transmission Fluid (MTF) until it
starts to run out of the check bolt
hole.
2010 TL
Transmission Fluid
FILLER BOLT
WASHER
Pour the fluid into the filler hole
slowly and carefully so you do not
spill any. Clean up any spills
immediately; it could damage
components in the engine
compartment.
Let the fluid run out until it stops,
then reinstall the check bolt and the
filler bolt.
CONTINUED
517