Sony SRMASTER SR-R4 Operation Manual page 44

Setting Item
METER TYPE
PEAK HOLD
BEEP (PHONE)
Sets the volume of the
beep tone.
INPUT DELAY
Recording audio
signal phase setting
44 AUDIO Setup Menu
ALARM
WARN
ANALOG
INPUT DELAY
Settings
Sets the display range of the audio level meters.
PEAK [Full Peak]: Displays 0 dBFS as the peak value.
REF [Full Ref]: Displays the reference level (+4 dBu) as
0 dB.
FINE [Fine]: Displays a scale with 0.25 dB steps and -20
dB at the center.
Sets whether or not to use the peak hold function.
ON [On]: Uses the function.
OFF [Off]: Does not use the function.
Sets whether or not to output alarm tones.
OFF [Off]: Does not output alarm tones.
HIGH [High]: Outputs high-level alarm tones.
LOW [Low]: Outputs low-level alarm tones.
Sets whether or not to output warning tones.
OFF [Off]: Does not output warning tones.
HIGH [High]: Outputs high-level warning tones.
LOW [Low]: Outputs low-level warning tones.
Sets whether or not to add a delay to the ANALOG audio
input.
OFF [OFF]: Does not add delay.
ON [ON]: Adds delay.
Sets the delay length for items set to be delayed.
0 [NO DELAY]: Does not add delay.
+1 [+1F Delay]: Records the audio signal with a delay of
1 frame (use this when the input video signal has a
delay of one frame with respect to the audio signal).
+2 [+2F Delay]: Records the audio signal with a delay of
2 frames (use this when the input video signal has a
delay of two frames with respect to the audio signal).
+3 [+3F Delay]: Records the audio signal with a delay of
3 frames (use this when the input video signal has a
delay of three frames with respect to the audio signal).
+4 [+4F Delay]: Records the audio signal with a delay of
4 frames (use this when the input video signal has a
delay of four frames with respect to the audio signal).
+5 [+5F Delay]: Records the audio signal with a delay of
5 frames (use this when the input video signal has a
delay of five frames with respect to the audio signal).