Sony SRMASTER SR-R4 Operation Manual page 14

5.
Status indication
Shows the control mode of the unit
(LOCAL), power mode (EE), and current
time.
Top row Shows LOCAL always.
Bottom row Shows the current time.
6.
Signal format indication
Shows the format of the signal being
recorded.
7.
Encoding format indication (page 57)
Shows the encoding and bit rate settings used
for recording.
8.
SRMemory card remaining capacity
indication
Shows the remaining space on the
SRMemory card calculated as remaining
time, using the current recording settings.
When the remaining time is less than 3
minutes, the indication flashes.
9.
Power supply voltage indication (page 21)
Shows the power supply voltage.
10.
Signal format indication (page 27)
When the FUNC and HOME buttons are
pressed simultaneously, the signal formats
are displayed from top to bottom in system,
encoding, playback file name sequence, or in
playback file output, recording date, duration
sequence.
14 Names of Parts
To switch display to portrait mode
Press the HOME button while holding down the
FUNC and BACK buttons to switch the display to
portrait mode (rotate display 90° to the left).
To return to landscape mode, press the HOME
button again while holding down the FUNC and
BACK buttons.
SDI SDI SDI SDI SDI SDI SDI SDI
EM EM EM EM EM EM EM EM
L R L R L R L R L R L R L R L R
1 2 3 4 5 6 7 8
STOP
TCG
00 00 04
H M
SYS:F65RAW 23.98P
ENCODE:STANDARD
FILENAME:
16.7V REMAIN
77min
SDI SDI SDI SDI SDI SDI SDI SDI
EM EM EM EM EM EM EM EM
L R L R L R L R L R L R L R L R
9 10 11 12 13 14 15 16
SR-R4:CAM
KEYINHI
RECINHI
22
S F
LOCAL
F65RAW
23.98P EE
19:47