Sony SRMASTER SR-R4 Operation Manual page 18

3
Press down firmly on the point shown in
the diagram, and fasten the docking
screws.
Note
Do not push down on the lid.
Tip
You can leave the connector cap, which was
removed from the CAMERA connector, attached to
the docking screws.
Connector cap
18 Connect F65
Removing the Unit from the F65
1
Press down firmly on the point shown in
the diagram, and loosen the docking
screws.
2
Remove the unit by lifting it.
When lifting, hold the unit as close as
possible to the F65 and pull it up.
Note
Do not push on the ventilation openings.
3
Attach the connector cap to the
CAMERA connector of the unit.