Chapter 7 Status Display; Showing The Status Display - Sony PMW-EX30 Operating Instructions Manual

Status Display
Showing the
Status Display
This unit provides a status display
switchable through three types of screens,
allowing you to check the various settings
and statuses of the unit.
You can view the status display on the
monitor screen.
For connections of an external video monitor, see
"Connecting External Video Monitors" (page 68).
Available status screens
• Audio status screen (see page 80)
• Video status screen (see page 80)
• Remote/media status screen (see page
81)
Menu button
DISPLAY
1
REC LEVEL
CH-1
VIDEO INPUT TC/UB
iLINK
HD SDI
SG
CH-2
STATUS
AUDIO INPUT
ANALOG
HD SDI
CH-1/2
HD SDI
CH-3/4
F REV PREV NEXT F FWD PLAY/PAUSE
PHONES PHONE LEVEL
m . > M
u
TOP END
STATUS button
To show one of the status
display
Press the STATUS button.
MENU SET
ACCESS
A B
THUMBNAIL CANCEL
STOP REC
SLOT
x z
SELECT
M, m buttons
Chapter
To switch the status screens
Pressing the M or m button switches the
screens in sequence.
To clear the status display
Press the STATUS button again.
The status display is cleared if you press the
MENU button to show the menu and start or
stop (with the STOP button) playback.
Notes
• When playback starts after the status
display is shown in playback pause
mode, the status display is not cleared
automatically.
• When you show the status display during
recording, it is not cleared automatically
after you stops recording by pressing the
STOP button.

Showing the Status Display

7
79