Operating Clips With A Computer - Sony PMW-EX30 Operating Instructions Manual

Operating Clips
with a Computer
The clips recorded on SxS memory cards
with this unit can be controlled on a
computer or edited using the optional
nonlinear editing software.
This section shows an example for
connecting this unit and the SBAC-US10
SxS Memory Card USB Reader/Writer
(optional) to a computer using the supplied
USB cable. When memory cards are
inserted in this unit, they are recognized as
two independent extended drives by the
computer.
On how to use the SBAC-US10, refer to the
operating instructions supplied with the SBAC-
US10.
SxS
memory
card
SBAC-US10
a) USB cable (supplied with this unit)
b) USB cable (supplied with the SBAC-US10)
c) With clip managing and editing software
installed
70

Operating Clips with a Computer

This unit
a)
b)
c)
Computer
Notes
• When connecting the USB cable to the
computer, be careful to check the form
and direction of the USB connector.
• This unit and the SBAC-US10 do not
work on the bus power from the
computer. Supply the operating power
independently.
To check the connection
between this unit and the
computer
1
Turn this unit on.
A message prompting you to confirm
that you wish to enable the USB
connection is displayed on the LCD
display.
Connect USB Now?
Execute
Cancel
Note
This message will not be displayed
while another confirmation message or
in-progress message (e.g., for
formatting or restoration of an SxS
memory card) is shown on the screen.
It appears when formatting or
restoration is completed.
The message is also not displayed
while the CLIP INFO screen is shown
on the screen. It appears when an
operation on the CLIP INFO screen is
completed or you return to the
thumbnail screen.
2
Select "Execute" and press the SET
button.
The following screen appears.