Using The Timer; Timer Display Modes - Sony PCM-3348HR Operation Manual

2-5 Using the Timer

2-5-1 Timer Display Modes

The timer display has four modes for showing the tape
time.
• CTL absolute value display mode
This displays the CTL address exactly as recorded on
the tape.
• Time code absolute value display mode
This displays the time code directly, as produced by
the internal time code generator, or the external time
code or time code recorded on the tape.
• CTL relative value display mode
This shows the tape running time from "0:00:00" at
the CTL address set as the reference point. Values
before the reference point are indicated as negative.
CTL address
8 9 10 11 12
CTL relative value display mode
–3 –2 –1 0 1
CTL relative value display mode
2-14
Chapter 2 Preparations
13 14 15 16 17
2 3 4 5 6
• Timer roller counter mode
This displays a count value from the timer roller. In
this mode, even if splice editing, for example, has
made the CTL addresses discontinuous, the values
displayed are continuous.
Splice editing point
CTL addresses
3 4 5
Timer roller counter mode
3 4 5
Timer roller counter mode
21 22 23
6 7 8