Using The Phu-60K (Optional); Connecting/Removing The Phu Connection Cable; Formatting The Phu-60K - Sony PMW-EX30 Operating Instructions Manual

Solid state memory recorder
Hide thumbs Also See for PMW-EX30:
Table of Contents

Advertisement

Using the PHU-
60K (Optional)
You can use an optional PHU-60K
Professional Hard Disk Unit with this unit.
The PHU-60K incorporates a 60 GB 1.8-
inch hard disk, on which up to 200 minutes
of HD video can be recorded in HQ mode.
Note
High-speed playback (see page 51) may not
be properly achieved with the PHU-60K.
On how to use the PHU-60K, refer to the operating
instructions supplied with the PHU-60K.
Connecting/removing the
PHU connection cable
Recording/playback can be made using the
PHU-60K in the same manner as with SxS
memory cards by connecting the PHU
connection cable to an SxS memory card
slot.
To connect the PHU
connection cable
Insert the PHU connection cable into the
memory card slot as shown in the following
figure.
Insert so that the cable extends upward.
When the PHU-60K is turned on, the
POWER indicator of the PHU-60K lights in
green.
Subsequently, the ACCESS lamp of this
unit lights in red then changes to green once
the unit is ready for use.
To disconnect the PHU
connection cable
Operate in the same manner as when you
remove an SxS memory card from the slot
(see page 38).

Formatting the PHU-60K

For a PHU-60K that is not formatted or that
was formatted with another system, a
message to confirm if formatting is to be
executed is displayed on the monitor
screen.
To execute formatting
If the message for formatting is displayed,
press the M or m button to select "Execute"
then press the SET button.
Formatting begins, an in-progress message
and status bar (%) are displayed, and the
ACCESS lamp lights in red.

Using the PHU-60K (Optional)

41

Advertisement

Table of Contents
loading

Table of Contents