Procedure 4 Test Program Check - Toshiba Satellite A105-S4547 Maintenance Manual

2.5 2.5-inch HDD

Procedure 4 Test Program Check

Run the HDD test program stored on the maintenance test program disk for all test items.
See Chapter 3 for details on how to use the test program.
If an error is detected during the HDD test, an error code and status will be displayed. The
error codes and their status names are listed in Table 2-1. If an error code is not generated
and the problem still exists, go to Procedure 5.
Code
1
Get Parameter Fail !
2
Read Old Data Error
3
Write Pattern Error
4
Read Back Data Error
5
Data Compare Error
6
Restore Data Error
7
Read Verify Error
9
Seek Error
10
Disk Controller Self Test Failed
11
Disk Controller Test unexpected interrupt Failed
12
Disk Controller action Test Failed
13 Disk dos not support SMART
14
Disk read attribute threshold error
15
Disk read attribute value error
16
Disk SMART attribute value error
Satellite A100/A105 / TECRA A7 Maintenance Manual
Table 2- 1 HDD error code and status
Status
2 Troubleshooting
2-15