Table of Contents
Advertisement
2
Hold MENU.
3
Select Settings > Bike Settings.
4
Select a bike.
5
Select Bike Details > More > Crank Length > Manual.
6
Enter the crank length.
Performing a Static Zero Calibration
NOTE: During this task, the bike must be in an upright position,
and nothing can be touching the pedals.
1
Hold MENU.
2
Select Settings > Bike Settings.
3
Select a bike.
4
Select ANT + Power > Calibrate.
When the zero reference is determined, a message appears
on the Edge device.
Customizing the Data Fields
This procedure contains instructions for the Edge 500 device.
1
Hold MENU.
2
Select Settings > Bike Settings > Data Fields.
3
Select a page.
4
Select the number of data fields to appear on the page.
5
Select a data field.
Power Data Fields
NOTE: This list contains power data fields for the Edge 810 and
510 devices. If you have another compatible device, see your
device owner's manual.
Balance: The current left/right power balance.
Balance - 10s Avg.: The 10-second moving average of the left/
right power balance.
Balance - 30s Avg.: The 30-second moving average of the left/
right power balance.
Balance - 3s Avg.: The three-second moving average of the
left/right power balance.
Balance - Avg.: The average left/right power balance for the
current activity.
Balance - Lap: The average left/right power balance for the
current lap.
Cadence: The revolutions of the crank arm or strides per
minute. Your device must be connected to a cadence
accessory.
Cadence - Avg.: The average cadence for the current activity.
Cadence - Lap: The average cadence for the current lap.
Power: The current power output in watts.
Power - %FTP: The current power output as a percentage of
functional threshold power.
Power - 10s Avg.: The 10-second moving average of power
output.
Power - 30s Avg.: The 30-second moving average of power
output.
Power - 3s Avg.: The three-second moving average of power
output.
Power - Avg.: The average power output for the current activity.
Power - IF: The Intensity Factor™ for the current activity.
Power - kj: The accumulated work performed (power output) in
kilojoules.
Power - Lap: The average power output for the current lap.
Power - Last Lap: The average power output for the last
completed lap.
Power - Max.: The top power output for the current activity.
6
Power - NP: The Normalized Power™ for the current activity.
Power - NP Lap: The average Normalized Power for the
current lap.
Power - NP Last Lap: The average Normalized Power for the
last completed lap.
Power - TSS: The Training Stress Score™ for the current
activity.
Power - Watts/kg: The amount of power output in watts per
kilogram.
Power Zone: The current range of power output (1 to 7) based
on your FTP or custom settings.
Troubleshooting
Updating the Software Using Vector Updater
Before you can run the Vector Updater application, you must
have a USB ANT Stick (included), an internet connection, and
the pedal pods must have functioning batteries installed.
1
Go to www.garmin.com/vectorowner, and download the
Vector Updater application.
2
Bring Vector within range (3 m) of your computer.
3
Open the Vector Updater application, and follow the on-
screen instructions.
Tips for Using Vector Updater
If Vector Updater is not functioning properly, you can try these
tips.
• Insert the USB ANT Stick directly into a USB port on your
computer. USB hubs are not recommended.
• If you are also running the ANT Agent™ application on your
computer, you can either insert another USB ANT Stick or
close the ANT Agent application.
• If Vector Updater cannot find your device after more than two
minutes, remove the batteries from each pedal pod, wait 20
seconds, and replace the batteries.
If Vector Updater still cannot find your device, you should
install new batteries into each pedal pod.
Third-Party Devices
For a list of devices that are compatible with Vector, go to
www.garmin.com/vectorowner.
Appendix
Hide quick links:
Advertisement
Table of Contents
