Garmin Vector Owner's Manual

Garmin Vector Owner's Manual

Owner's manual
Hide thumbs Also See for Vector:

Advertisement

Vector
Owner's Manual
August 2013
190-01450-00_0A
Printed in Taiwan

Advertisement

Table of Contents
loading

Summary of Contents for Garmin Vector

  • Page 1 Vector ™ Owner’s Manual August 2013 190-01450-00_0A Printed in Taiwan...
  • Page 2 Garmin ® , Edge ® , and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. ANT+™, ANT Agent™, Garmin Connect™, USB ANT Stick™, and Vector™...
  • Page 3: Table Of Contents

    Installing the Pedal Pod and Pedal ........1 Installing the Shoe Cleats ............. 2 Adjusting the Release Tension ..........2 Pairing Vector with Your Edge 810 or 510 Device ..... 2 Your First Ride ................2 Entering the Crank Length ............ 2 Setting the Installation Angle ..........
  • Page 5: Introduction

    For software updates, video tutorials, and everything you need If it touches anywhere else, use another washer to provide to get years of service out of your Vector, go to the necessary clearance. www.garmin.com/vectorowner. • If the mounting face of the crank arm is protruding, do not Now it's time to put the power under your feet and get out there use washers.
  • Page 6: Installing The Shoe Cleats

    Your First Ride Rotate the crank arm to check for clearance. Before you ride with Vector for the first time, you must enter the Repeat steps 2–9 to install the right pedal. crank length, set the install angle of the sensors inside the NOTE: If the pedal pod cable rubs the chain, you can add pedals, and calibrate the static zero reference.
  • Page 7: Customizing The Data Fields

    Vector measures pedal-based power. Plug the small end of the USB cable into the mini-USB port. Vector measures the force you apply a few hundred times every Plug the large end of the USB cable into a computer USB second. Vector also measures your cadence or rotational port.
  • Page 8: Removing The Pedal Pod And Pedal

    NOTE: The right pedal has a left-handed (reverse) thread. Vector Storage As you unscrew the pedal, the pedal pod cable disengages If you are transporting your bicycle or not using Vector for an from the spindle. extended period of time, Garmin recommends removing Vector After you move Vector to another bike, you must recalibrate the and storing it in the product box.
  • Page 9: Replacing The Pedal Pod Battery

    Calibrate Vector before each ride (page Entering the Crank Length The crank length is often printed on the crank arm. Rotate the pedals a few times in order to activate Vector. Select MENU > > Bike Settings > Bike Profiles. Select a profile.
  • Page 10: Customizing The Data Fields

    ANT Agent application. Balance - 10s Avg.: The 10-second moving average of the left/ • If Vector Updater cannot find your device after more than two right power balance. minutes, remove the batteries from each pedal pod, wait 20 Balance - 30s Avg.: The 30-second moving average of the left/...
  • Page 11: Index

    5, 6 cleaning the device 3 cleats 2 compatibility 6 customizing the device 3, 6 data storing 3 transferring 3 data fields 3, 6 Edge 2, 5 Garmin Connect 3 storing data 3 history 3 sending to computer 3 installing 1, 2 memory 3 pairing 2, 5 pedal pods 1, 4, 5 pedals 1–4 power 3 product registration 5...
  • Page 12 Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park Southampton, Hampshire, SO40 9LR UK Garmin Corporation No. 68, Zhangshu 2nd Road, Xizhi Dist. New Taipei City, 221, Taiwan (R.O.C.) TA-2013/403 © 2013 Garmin Ltd. or its subsidiaries...

Table of Contents