NETGEAR MCA1001 V2 Package Contents Manual page 9


To connect a MoCA adapter to a TV (in a different room):
1. Connect the MoCA adapter to the cable jack.
a. Locate the coax cable that connects your TV to the cable jack
in the wall outlet.
b. Disconnect it from the TV, but leave the other end of the
cable connected to the cable jack.
c. Connect the coax cable to the Coax IN jack on the MoCA
adapter by hand, finger-tight.
2. Connect the MoCA adapter to the TV.
Use a different coax cable (sold separately) to connect the MoCA
adapter's TV OUT jack to the TV by hand, finger-tight.
3. Connect your equipment to the Ethernet port.
You can use the Ethernet cable included in the package to
connect equipment like a gaming console, set-top box, Ethernet
switch, or a Blu-Ray DVD player.
4. Connect the provided power adapter to the MoCA adapter and plug
it into a power outlet.
The POWER LED lights up.
7