Foreword; Using The Cold Shoe Kit - Sony PMW-TD300 Supplement Manual

Foreword

This document contains the following
supplementary information about the
PMW-TD300 (called "the camcorder" below).

• Using the Cold Shoe Kit

• Using a Media Adaptor
• Operating from the RM-B150/B750
• Functions That Can Be Controlled from the
RM-B150/B750
• Using a Wi-Fi Adapter
• Output Formats and Limitations
Using the Cold Shoe Kit
You can attach and use slide shoe type
accessories by first mounting the supplied cold
shoe kit (auxiliary shoe, four screws, and a
bottom plate) on the accessory shoe of the
camcorder.
1
Secure the auxiliary shoe to the
accessory fitting shoe with the four
screws.
Auxiliary shoe
2
Fit the bottom plate (spring type) into
the auxiliary shoe.
Slits for screw holes
Insert the bottom plate from the end where
the slits for the screw holes of the auxiliary
shoe are not open.
If you secure the auxiliary shoe in the
direction opposite that shown in the above
figure with the slit open end forward, insert
the bottom plate from the direction opposite
to that shown in the figure.
Foreword / Using the Cold Shoe Kit
Accessory
fitting shoe
Bottom plate
3