Making A Wi-Fi Connection - Sony PMW-TD300 Supplement Manual

Solid-state memory 3d camcorder
Hide thumbs Also See for PMW-TD300:
Table of Contents

Advertisement

External device connector

Making a Wi-Fi Connection

Two types of Wi-Fi connections are available. In
"ad-hoc mode", you can make a peer-to-peer Wi-
Fi connection between a computer and
camcorder. In "infrastructure mode", you can
make Wi-Fi connections between a computer and
multiple camcorders via a wireless LAN access
point (building a LAN).
To make a network setting
Change settings under MAINTENANCE
>Network Setting in the setup menu as required.
Item
Setting
DHCP
Setting that specifies whether to
acquire the IP address
automatically from a DHCP server
Enabled: Acquire automatically.
Disabled: Do not acquire
automatically (factory default
setting).
IP Address
IP address
setting: 192.168.1.10)
Subnet Mask Subnet mask (factory default
setting: 255.255.255.0)
Default
Default gateway (factory default
Gateway
setting: 0.0.0.0)
User Name
User name for log-in (factory
default setting: admin)
Password
Password for log-in (factory default
setting: model name "pmw-td300")
16
Using a Wi-Fi Adapter
Cable holder
a)
(factory default
a) The IP address determined by DHCP server is
displayed here.
When you have changed a setting
Set the Set item to [Execute]. When a
confirmation message appears, turn the MENU
knob to select "Execute" and press the knob.
To make a connection in ad hoc mode
1
Refer to "Settings on the Computer"
under "Making a Wi-Fi Connection to
Your Computer (Ad hoc Mode)" in the
Operating Instructions supplied with
the CBK-WA01 to make settings on the
computer.
2
Start a connection on the computer.
3
Set MAINTENANCE >Wi-Fi Setting
>Wi-Fi to [Enable] in the setup menu.
4
Set MAINTENANCE >Wi-Fi Setting
>Scan Networks to [Execute] and press
the MENU knob.
The camcorder starts scanning for a network
connection.
When networks are detected, the
NETWORK SCAN list appears.
5
Turn the MENU knob to select a
network and press the knob.
The MAINTENANCE menu appears again.
6
Confirm that the settings for the Wi-Fi
Setting item conform to the network
setting on the computer.
SSID (network name): Selected network
name
Network Type (connection mode): Adhoc
CH (channel): 1
Authentication (network authentication):
Depending the settings on the computer,
Open, Shared or WPA

Advertisement

Table of Contents
loading

Table of Contents