Adjusting The Computer Image - Insignia NS-29LD120A13 User Manual

Insignia 29" LCD TV/DVD Combo
• Aspect Ratio—Selects the aspect ratio of
the picture.
Aspect ratio options
Normal:
Displays the original 4:3 aspect
ratio with vertical black bars on
the left and right of the image.
Zoom:
Expands the image to fill the
screen. The top and bottom of
the image may be cropped.
Wide:
Use this option to view content
recorded in a 16:9
(wide-screen) aspect ratio.
Cinema:
Stretches the image at the
edges, but keeps a clear image
in the center.
Auto:
Automatically adjusts the
image based on the screen size
and the TV program.
Note: Auto is only available
when Auto Zoom in the
Channels menu is set to On.
Note
You can also press ZOOM to select the aspect ratio.
• Color Temperature—Selects the color
temperature. You can select Cool (to
enhance the blues), Normal, or Warm (to
enhance the reds).
• Overscan—Adjusts the picture's
reproduction rate. You can select On or
Off.
• Noise Reduction—Selects the noise
reduction mode to reduce picture noise
(snow). You can select Low, Middle, High,
or Off.
• Adaptive Contrast—Automatically
adjusts picture detail and brightness. You
can select On or Off.
• Dynamic Backlight (DCR)—Enhances the
contrast ratio between light and dark areas
of the picture. You can select Off, Low, or
High.
• Reset Picture Settings—Resets all picture
settings to factory mode.
4 Press or to adjust the option, or press
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Adjusting the computer image

Example
or
www.insigniaproducts.com
To adjust the computer image:
1 Make sure that your TV/DVD combo is in VGA
mode. For more information, see
video input source" on page 20.
2 Press MENU. The on-screen menu opens.
PICTURE
Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
Reset Picture Settings
Move OK
Select
ENTER
Adjust settings to affect picture quallty
3 Press or to highlight SETTINGS, then press
OK. The Settings menu opens.
PICTURE
Settings
Parental Controls
Closed Caption
Time
Menu Language
Auto Input Senstin
Input Labels
Computer Settings
System Info
Reset to Default
OK
MOVE SELECT
ENTER
Set options for when a computer is connected to the TV
4 Press or to highlight Computer Settings,
then press OK. The Settings-Computer Settings
menu opens.
PICTURE
Settings-
Computer Settings
Auto Adjust
H. Position
V. Position
Clock
Phase
Reset Computer Settings
OK
Move Select
ENTER
Adjust to the PC signal timing automatically when ON
5 Press or to highlight an option, then press
OK to access the option. You can select:
• Auto Adjust—Automatically adjusts the
image settings such as position and phase.
• H. Position—Moves the image right or left.
• V. Position—Moves the image up or down.
• Clock—Adjusts the sample frequency.
• Phase—Adjusts the focus of stable images.
• Reset Computer Settings—Resets all
computer settings to factory mode.
"Selecting the
AUDIO CHANNELS SETTINGS PHOTOS
Energy Savings
00
00
00
00
00
Previous Exit
MENU EXIT
AUDIO CHANNELS SETTINGS PHOTOS
English
On
PREVIOUS EXIT
MENU EXIT
AUDIO CHANNELS SETTINGS PHOTOS
00
00
00
00
Previous Exit
MENU EXIT
23