Fujitsu LIFEBOOK 990TX2 User Manual page 83

Table 3-5 Fields, Options and Defaults for the I/O Device Configuration Submenu of the Advanced Menu
Menu Field Options
Serial Port A: Disabled;Enabled; Auto.
Base I/O address: 3F8; 2F8; 3E8; 2E8.
Interrupt: IRQ 3; IRQ 4;
IRQ 10; IRQ 11.
Serial Port B: Disabled;Enabled; Auto.
Mode: IrDA; FIR.
Base I/O address: 3F8; 2F8; 3E8;2E8.
C o n f i g u r i n g Y o u r L i f e B o o k 9 0 0 S e r i e s
Default
[Enabled]
[3F8]
[IRQ 4]
[Enabled]
[FIR]
[2E8]
L i f e B o o k 9 0 0 S e r i e s f r o m F u j i t s u
Description
Configures the serial port A using either no configuration
(Disabled),a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
Allows user to set the serial port base I/O address when p ort
A is Enabled.
Allows user to set the serial port interrupt when port A
is Enabled.
Configures the serial port A using either no configuration
(Disabled),a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
Allows user to set the serial port mode when port B is Enabled.
Allows user to set the se rial port base I/O address when port B
is Enabled.
73