Fujitsu LIFEBOOK 990TX2 User Manual page 74

S e c t i o n T h r e e
Table 3-2 Fields, Options and Defaults for the Primary Master, Secondary Master/Slave Submenus
Menu Field Options
Type: Auto; None;CD-ROM;
ATAPI Removable; User.
Cylinders: A number between 0
and 65,535.
Heads: A number between 1 and 16.
Sectors: A number between 0 and 63.
64
Default Description
[Auto] Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOSat POST. If None is selected,
all of the following Set-up items do not appear. Select CD-ROM
if a CD-ROM drive is installed at this connection. If User is
selected, you must specify the number of Cylinders, Heads,
and Sectors for the drive. Select ATAPI Removable if a removable
disk drive is installed at this connection.
This item appears only when Auto is selected and the type is
identified as hard disk, or User is selected. When User is selected,
you can change the value. This field is changed by incrementing
(pressing the Spacebar) or by typing in the number.
This item appears only when Auto is selected and the type is
identified as hard disk, or User is selected. When User is selected,
you can change the value. This field is changed by incrementing
(pressing the Spacebar) or by typing in the number.
This item appears only when Auto is selected and the type is
identified as hard disk, or User is selected. When User is selected,
you can change the value. This field is changed by incrementing
(pressing the Spacebar) or by typing in the number.