Fujitsu LIFEBOOK 990TX2 User Manual page 128

Fujitsu laptop - computer notebook user manual
Table of Contents

Advertisement

S e c t i o n
F o u r
Warm-swappable Devices in
Multi-function Bay 1 and 2
Devices designed for use in Multi-function
Bays 1 and 2 of your LifeBook 900 Series note-
book computer are warm-swappable. Devices
in either Multi-function Bay can be installed
or removed while the system is in Suspend
mode. In order to facilitate the warm-swap
process, your notebook contains Tioman
warm-swap software from Agaté. The Tioman
software loads at system startup and displays
an icon in the Status area at the right of the
Windows 95 Taskbar.
This icon provides a visual cue for the currently
inserted device. You will immediately notice
whether a diskette drive,CD-ROM drive, hard
drive, or even no device is inserted in the bay.
Hover over the icon with the cursor to display
the tooltip balloon, containing information on
the inserted device. Right-click on the icon to
display the Tioman menu. This menu offers
additional functionality for swapping devices,
getting help, as well as information on the
Tioman software.
118
Multi-function Bay 1 Eject Lever
Multi-function Bay 1 Relese Button
Figure 4-2 Removing and Installing a
Device in Multi-function Bay 1
C A U T I O N
Only one optional second battery is
supported. Your notebook does not sup-
port three (3) batteries simultaneously.
Removing a Device in either
Multi-function Bay 1 or 2.
1. Close any open files on the removable device
that you plan to eject from the computer, if a
device is currently installed.
2. Right-click the Tioman taskbar icon to
Connector for
display the menu.
Multi-function
3. Select the Swap Device menu item.
Bay 1 Device
4. When the notebook goes into the Suspend
mode you can safely remove the device from
the Multi-function bay.
To Remove a Device from Multi-function Bay 1
5. Slide the release latch on the left side panel
toward the bottom of your notebook.
6. While holding the release button in the
release position use the Multi-function Bay 1
Eject lever on the bottom of your notebook
(Figure 4-2) to push the device toward the
front of your notebook until the connector
is disconnected.

Advertisement

Table of Contents
loading

Table of Contents