Intel RH80536GC0332M - Pentium M 1.8 GHz Processor Datasheet page 25

Table 3-5. Voltage and Current Specifications - Low Voltage Processors (Sheet 2 of 2)
Symbol
V
CCD738
NOTES:
1. The typical values shown are the VID encoded voltages. Static and ripple tolerances (for minimum and
maximum voltages) are defined in the load line tables,
specifications for the Pentium M processor is required to ensure reliable processor operation.
2. The voltage specifications are assumed to be measured at a via on the motherboard's opposite side of the
processor's socket (or BGA) ball with a 100-MHz bandwidth oscilloscope, 1.5-pF maximum probe
capacitance, and 1-MΩ minimum impedance. The maximum length of ground wire on the probe should be
less than 5 mm. Ensure external noise from the system is not coupled in the scope probe.
Datasheet
Parameter
Pentium M Processor,
Low Voltage,
738 Core VCC for
Enhanced Intel
SpeedStep Technology
Operating Points:
1.4 GHz
1.3 GHz
1.2 GHz
1.1 GHz
1.0 GHz
900 GHz
800 MHz
600 MHz
Min Typ Max
1.116
1.116
1.100
1.068
1.052
1.036
1.020
0.988
Table 3-8 through
Electrical Specifications
Unit Note
V 1, 2
Table 3-21. Adherence to loadline
25