NETGEAR RN12P1210-100NAS - ReadyNAS 3200 RN12P1210 NAS Server Hardware Manual page 23


To install the system into a rack:
Read these instructions in their entirety before you begin. Locate the ReadyNAS shipping
carton and remove the rack-mounting kit.
1. Extend the rail assembly by pulling it outward.
2. Press the release tab and separate the inner rail from the outer assembly.
3. Connect the rails.
4. Use the provided mounting screws to mount the inner rails to the system chassis, as follows:
a. Fasten the backs of the outer rails to the rack with screws.
b. Press the release to extend the rails.
c. Hang the rails into the rack holes and fasten the rails to the rack.
NETGEAR ReadyNAS Rack-Mount Storage Systems
ReadyNAS 3100
23