NETGEAR RN12P1210-100NAS - ReadyNAS 3200 RN12P1210 NAS Server Hardware Manual page 13


To access the boot menu:
1. Power off your unit.
2. Using a straightened paper clip, press and hold the Reset button.
3. Press the Power button to power up the unit.
4. Continue to press the Reset button until all the LEDS except the disk activity LED illuminate.
5. Press and release the Backup button to scroll through the boot menu modes.
The following table lists the boot menu's LED status blink pattern, which you can use to
identify boot mode options.
Boot Menu Mode
Normal
Factory default
OS reinstall
Tech support
Skip volume check
Memory test
Disk test
Legend:
Off: 
•

• On:
6. Press the Reset button to confirm your boot mode choice.
The system boots in the selected boot mode.
NETGEAR ReadyNAS Rack-Mount Storage Systems
USB Disk 1 Disk 2
LED LED LED
Status Status Status

 

 
  
  

 
 

 

ReadyNAS 1500 and 2100
Disk 3 Disk 4
LED LED
Status Status
 
 




 
 
 
13