Changing The Connection Order Of The Effects (Chain); Using The Three-Band Equalizer - Vox Tonelab LE Owner's Manual

8. To adjust the reverb mix amount, use value knob 6 which controls the MIX parameter.
In the same way for PEDAL, MODULATION, and DELAY effects, use the selector to choose
an effect and the value knobs to adjust the parameters.
HINT: In some cases, it's easier to adjust the PEDAL effect if modulation, delay, and reverb are not
being applied. If you're using the PEDAL effect, it's best to make your amp and cabinet settings
first, and then adjust the pedal effect before the other effects.
NOTE: For some of the models, the name of the actual parameter you will be editing may differ from
what is printed in the parameter line of the edit section. The name that appears in the display
when you operate a value knob is the actual name. For details on parameters refer to p.34.
9. If you want to continue making adjustments, simply press the select button for the model
you want to edit, and turn the value knobs.
HINT: If the EXP-CTL-CHAIN button lights when you operate a value knob, you have the option of
assigning that parameter to an expression pedal. If you press and hold the EXP-CTL-CHAIN
button for at least one second, the parameter will be assigned to the expression pedal (EXP).
(We call this the Expression Pedal Quick Assign function.) For example if you set the PEDAL
model selector to U-VIBE and use value knob 1 to adjust the SPEED parameter, the EXP-CTL-
CHAIN button will light to indicate that you can use the above method to assign the SPEED
parameter to the expression pedal. For details, refer to p.47.
NOTE: If you've used the PEDAL selector to select VOX WAH, the MANUAL parameter will automati-
cally be assigned to expression pedal (EXP), letting you use the pedal as a wah pedal.
10. If you notice that the volume level of a specific program is different from that of other pro-
grams and you wish to adjust the level, press the CAB button while holding down the AMP
button, then turn the PROG LVL knob (value knob 6). You can also apply this procedure if
some effect settings cause sound clipping.
C
HANGING THE CONNECTION ORDER OF THE
You are free to change the order in which the modulation effect, delay effect, and reverb effect
are connected.
The effect connection order is saved independently for each program.
1. Press the EXP-CTL-CHAIN button, then use the √ and ® buttons to make the value knob 6
LED blink. The current connection order is displayed.
Use value knob 6 or the ▲, ▼ buttons to change the order.
2.
Display
MD-DL-RV
MD-RV-DL
DL-MD-RV
DL-RV-MD
RV-MD-DL
RV-DL-MD
U T
SING THE HREE
If you selected "Ln2" for the "AMP/LINE" setting, you can use the three-band equalizer to adjust
the overall tonal characteristics of the sound output from ToneLab LE.
When you select "Ln2" for the "AMP/LINE" setting, the value knobs 2–6 feature the following functions:
Value knob 2 "TRIM"
Value knob 3 "LO GAIN"
Value knob 4 "MID FREQ"
Value knob 5 "MID GAIN"
Value knob 6 "HI GAIN"
NOTE: The equalizer is unavailable if you selected "AP1," "AP2," "AP3," or "Ln1" for the "AMP/LINE" setting.
Connection order
modulation→delay→reverb
modulation→reverb→delay
delay→modulation→reverb
delay→reverb→modulation
reverb→modulation→delay
reverb→delay→modulation
- E
BAND QUALIZER
Adjusts the input level.
Adjusts the amount of low-range boost.
Specifies the mid-range frequency.
Adjusts the mid-range boost.
Adjusts the high-range boost.
25
E (CHAIN)
FFECTS