Edit Section; Display Section - Vox Tonelab LE Owner's Manual

E
2
DIT SECTION
2.1
2.1 Edit category LEDs
One of the LEDs will light up to indicate the category of effect you are currently editing.
Alternatively, an LED will light up to indicate the line of parameter names that you are cur-
rently adjusting.
2.2 Value knobs 1–6
Use these to adjust the parameters of the effects or amp model. Your adjustments will mod-
ify the effect whose MODEL select button you pressed (i.e., the button that is blinking). The
LEDs below the knobs will light to indicate the knobs that are available.
The LEDs below the knobs will blink to indicate that the knobs are available to adjust the
parameters on the name display.
For details on the parameter controlled by each knob, refer to p.34–. (From the left, we refer
to these as value knobs 1–6.)
When the EXP-CTL-CHAIN button is blinking, these knobs adjust the corresponding func-
tions.
When you are making RENAME or GLOBAL settings, or when executing the WRITE opera-
tion, you can use value knob 6 to change values.
3
D
ISPLAY SECTION
3
3.4
3.1
3.2
3.1 Name display
Displays program names, effect names, or parameter names.
3.2 Valve icon
Indicates the number and type of power valve — a.k.a. "vacuum tube" — used in the original
amp that is being modeled.
3.3 Value display
Indicates the value of the parameter you are editing.
If the displayed parameter value matches the original value (i.e., the value saved in the pro-
gram), the ORIG (original value) icon will appear.
HINT: The value display indicates the AMP/LINE setting after you turn on the power to the unit or
when you select a different program.
3.4 Bank display
Indicates the bank number. If the tuner is operating, this indicates the note name. (p.46)
2.2
4
3.3
4.1
14
4.4 4.5
4.6
4.2
4.3
4.7
4.8