Using The S/P Dif Connector; Adjust The Digital Output Level; Using Tonelab Le With A Midi Device Or Computer - Vox Tonelab LE Owner's Manual

7. To adjust the volume, turn up your amp or mixer and ToneLab LE's rear panel LEVEL knob
to a desired level (7.7).
NOTE: Since ToneLab LE uses an actual valve (vacuum tube), it will produce no sound for several sec-
onds until the valve warms up. This isn't a malfunction
HINT: If ToneLab LE is connected immediately preceeding a combo or head amp, set the tone con-
trols of your guitar amp to their center positions, adjust the amp accordingly to avoid uninten-
tional distortion. Then, bypass ToneLab LE, and adjust the rear panel LEVEL knob so that the
volume level is the same as when your guitar is connected directly to the amp.
HINT: If you're connecting ToneLab LE to a guitar amp that has a jack allowing you to connect directly
before the power amp (such as Return or Main In), set the AMP/LINE menu item to "Ln
"Ln2"
(LINE), and then connect ToneLab LE to that jack. If you want to take advantage of the
tonal character of that amp (and cabinet), you may want to turn ToneLab LE's CABINET setting
"OFF."
HINT: When the program name is displayed, you can press and hold the EXIT/TUNE button for one
second or longer to activate the Key Lock function. This function disables operation of the but-
tons, selectors, and knobs. To cancel the Key Lock function, press and hold the EXIT/TUNE
button again for one second or longer. (p.23)
Guitar
U S/P DIF
SING THE
By using the S/P DIF connector, you can transmit digital data between ToneLab LE and a con-
nected device, such as a recorder.
A
DJUST THE DIGITAL OUTPUT LEVEL
1. Press the GLOBAL button.
2. Repeatedly press the ® button until the display reads "DOUT LVL."
Use value knob 6 or the ▲, † buttons to set the output level at the S/P DIF connector.
3.
HINT: You can specify a level between –12 and +12. Level "0" (0dB) is nominal. Setting the level
above "0" may distort the sound of some programs.
U T L
SING ONE
By using MIDI you can control ToneLab LE from a sequencer or control an external MIDI device
from ToneLab LE. You can also save ToneLab LE programs on a sequencer or MIDI data filer
that is able to transmit and receive MIDI exclusive data, and then load the program data back
into ToneLab LE when desired.
HINT: For details on MIDI connections refer to p.51.
OUTPUT
L/MONO
Monaural phone jack
ToneLab LE
CONNECTOR
LE
AB WITH A
–
it's just the nature of valves.
R
Monaural
INPUT
phone jack
Guitar amp(s)
MIDI
DEVICE OR COMPUTER
20
1" or
Monaural
phone jack