Controls And Displays; Front Panel - Pioneer VSX-828-K, VSX-828-S, VSX-528-K, VSX-528-S Operating Instructions Manual

Chapter
1
1

Controls and displays

Front panel

1 2 3 4
11 12 13
1
INPUT SELECTOR dial
Selects an input source (page 27).
2
SPEAKERS
See Switching the speaker terminal on page
The Speaker System setting may or may not be displayed,
depending on the input source you have selected.
3
MCACC indicator
Lights when Acoustic Calibration EQ (page
Calibration EQ is automatically set to on after the Auto
MCACC setup (page 24)).
4
ZONE controls (VSX-828 only)
If you've made MULTI-ZONE connections (see
ZONE connections on page 57) use these controls to control
the sub zone from the main zone (see Using the MULTI-ZONE
controls on page 57).
Receiver control buttons (VSX-528 only)
– Dims or brightens the display. The brightness
DIMMER
can be controlled in four steps.
– Switches the display of this unit. The listening
DISPLAY
mode, sound volume, input name can be checked by
selecting an input source.
5 6 7 8 9
14 15 16
5
Character display
See Display on page
6
Tuner control buttons
15.
– Switches between AM, FM ST (stereo) and FM
BAND
MONO radio bands
– Use with
TUNER EDIT
to memorize and name stations for recall
ENTER
39) is on (Acoustic (page 34).
TUNE / – Used to find radio frequencies
PRESET /
(page 35).
Making MULTI-
7
HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected
8
iPod iPhone iPad indicator
Lights when an iPod/iPhone/iPad is connected and
input is selected (page
9
Remote sensor
Receives the signals from the remote control (see
range of remote control on page
10
19
26
VSX-828
17 18
8.
(page 34).
/, PRESET / and
TUNE
(page 34).
– Use to select preset radio stations
(page 17).
iPod/USB
29).
Operating
10).
7
20 21 22 23
27 28 29
10
MASTER VOLUME dial
11
STANDBY/ON
12
PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from PHONES SURR, STEREO or
STEREO ALC mode (S.R AIR mode can be also selected with
ADAPTER input).
13
MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC
setup (page 24).
14
Listening mode buttons
AUTO SURROUND/STREAM DIRECT
Auto surround mode (page 37) and Stream Direct
playback (page 38).
(VSX-828 only) – Press for
ALC/STANDARD SURR
standard decoding and to switch between the modes of
2 Pro Logic II, 2 Pro Logic IIx, 2 Pro Logic IIz and
NEO:6, and the Auto level control stereo mode
4
7
24 21 25
65
30 31 30 32
– Switches between
(page 37).