Remote Control - Pioneer VSX-828-K, VSX-828-S, VSX-528-K, VSX-528-S Operating Instructions Manual

1
1

Remote control

1
RECEIVER
SLEEP SOURCE
2
RECEIVER
3
INPUT
4
5
6
AUDIO
TOOLS
PARAMETER MENU
TOP
MENU
7
ENTER
8
HOME
MENU
PTY BAND
iPod CTRL RETURN
MUTE
9
1 2 3
DISP
4 5 6
CH
10
7 8 9
CH
SHIFT
0
CLR ENTER
RECEIVER
• The following buttons are not used with this receiver:
-
SHIFT
1
SLEEP
11
Press to change the amount of time before the receiver
switches into standby (30 min – 60 min – 90 min – Off). You
can check the remaining sleep time at any time by pressing
once.
SLEEP
2
RECEIVER
Switches the receiver between standby and on.
12
3
RECEIVER
Switches the remote to control the receiver (used to select the
white commands above the number buttons (MIDNIGHT,
etc)). Also use this button to set up surround sound
or Audio parameters
4
INPUT SELECT
Use to select the input source
13
5
Input function buttons
Use to select the input source to this receiver
will enable you to control other components with the remote
control (page 60).
6
Listening mode buttons
14
– Switches between Auto surround mode
AUTO/DIRECT
(page 37) and Stream Direct playback
ALC/STANDARD SURR
standard decoding and to switch between the modes of
15
2 Pro Logic II, 2 Pro Logic IIx, 2 Pro Logic IIz and
NEO:6, and the Auto level control stereo mode
ALC/STANDARD SURR
standard decoding and to switch between the modes of
2 Pro Logic II and NEO:6, and the Auto level control
16
stereo mode (page
– Switches between the various surround
ADV SURR
modes (page 38).
7
Receiver and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button (BD, DVD,
etc.).
Press first to access:
RECEIVER
AUDIO PARAMETER
(page 41).
(page 52)
(page 41).
(page 27).
(page 27). This
(page 38).
(VSX-828 only) – Press for
(page 37).
(VSX-528 only) – Press for
37).
– Use to access the Audio options
9
Controls and displays
– Press to access the Home Menu
HOME MENU
(page 52).
– Confirm and exit the current menu screen.
RETURN
Press BD, or first to access:
DVD DVR/BDR
– Displays the disc 'top' menu of a Blu-ray
TOP MENU
Disc/DVD.
– Displays the HOME MENU screen.
HOME MENU
– Confirm and exit the current menu screen.
RETURN
– Displays the TOOLS menu of Blu-ray Disc player.
MENU
Press first to access:
TUNER
– Memorizes stations for recall
TOOLS
used to change the name (page 35).
– Switches between AM, FM ST (stereo) and FM
BAND
MONO radio bands (page 34).
Press first to access:
iPod/USB
– Switches between the iPod controls and the
iPod CTRL
receiver controls (page 30).
PTY– Use to search for RDS program types
Europe)
/// (TUNE /, /),
8
PRESET
Use the arrow buttons when setting up your surround sound
system (page 52). Also used to control Blu-ray Disc/DVD
menus/options.
TUNE /
Use can be used to find radio frequencies and
PRESET /
can be used to select preset radio stations
(page 35).
9
Component control buttons
The main buttons (, , etc.) are used to control a component
after you have selected it using the input function buttons.
The controls above these buttons can be accessed after you
have selected the corresponding input function button (BD,
and CD). These buttons also function as described
DVD
below.
Press first to access:
RECEIVER
– Use to adjust Bass or Treble.
BASS +/–, TRE +/–
• These controls are disabled when the listening mode is
set to DIRECT or PURE DIRECT.
4
7
65
(page 34), also
(page 36). (for
ENTER