Connect The Surround Back Or Front Height Speakers (Vsx-828 Only) - Pioneer VSX-828-K, VSX-828-S, VSX-528-K, VSX-528-S Operating Instructions Manual

2
2
CAUTION
• These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric
shock when connecting or disconnecting the speaker cables, disconnect the power cord
before touching any uninsulated parts.
• Make sure that all the bare speaker wire is twisted together and inserted fully into the
speaker terminal. If any of the bare speaker wire touches the back panel it may cause the
power to cut off as a safety measure.

Connect the surround back or front height speakers (VSX-828 only)

The Speaker System setting must be set if the above connections are performed. Select
Surr.Back if the surround back speaker is connected and Height if the front height speaker is
connected (If neither the surround back speaker nor the front height speaker is connected,
either setting will suffice) (see The Speaker System setting (VSX-828 only) on page
• When using only one surround back speaker, connect it to the SURROUND BACK L (Single)
terminals.
VSX-828 connection diagram
Subwoofer Front right
55). LINE LEVEL
INPUT
The surround back terminals can also be used for ZONE 2.
Surround
right
13
Connecting your equipment
The front height terminals can also be used for Speaker B.
Front height setting
Front height left
Front height right
Speaker B setting
Speaker B – right Speaker B – left
Center
PREOUT
SURROUND
SUBWOOFER
R L
FRONT
R L
CENTER
5.1 ch surround setting
Not connected Not connected
6.1 ch surround setting
Not connected Surround back
7.1 ch surround setting
Surround back right Surround back left
ZONE 2 setting
ZONE 2 – Right ZONE 2 – Left
4
7
65
Front left
SURROUND BACK
R L
FRONT HEIGHT
R L
Surround
left