Cycle Guide; Timed Dry Cycles - Maytag MEDC300BW Use And Care Manual

CYCLE GUIDE — SENSOR DRY/AUTOMATIC DRY CYCLES
SENSOR DRY/AUTOMATIC DRY - Senses moisture in the load or air temperature and shuts off when the load reaches the selected
dryness level. Choose ENERGY PREFERRED cycle for optimal energy savings.
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you
like, select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
TIMED DRY - Will run the dryer for the specified time on the control.
Not all cycles and settings are available on all models.
Items to dry:
Heavy or bulky
items
Any load
Any load
Rubber, plastic, heat
sensitive fabrics
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low to Medium temperature setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
6
Dryness Level: Temperature
Fabric:
More Dry High
Energy Preferred
Less Dry
More Dry Medium or
Low
Energy Preferred
Less Dry
More Dry Low
Energy Preferred
Less Dry
Cycle: Temperature:
Heavy Dry Any
Freshen Up Any
Any
Damp Dry
Air Fluff Air Fluff
Available Options:
End of Cycle Signal Automatic cycles give the best drying
in the shortest time. Drying time varies
Wrinkle Control
based on fabric type, load size, and
dryness setting.
Select a drying temperature based on
the fabrics in your load. If you are unsure
End of Cycle Signal
of the temperature to select for a load,
Wrinkle Control
select the lower setting rather than the
higher setting.
End of Cycle Signal
Wrinkle Control
Available
Options:
End of Cycle Signal Completes drying if items are still damp.
End of Cycle Signal Use low to medium temperature to
smooth out wrinkles, such as those
found in clothes packed in a suitcase or
in items wrinkled from being left in the
dryer too long.
End of Cycle Signal
Dries items to a damp level or for items
that do not require an entire drying
cycle.
End of Cycle Signal
No heat drying.
Use the Air Fluff (no heat) setting for foam, rubber, plastic, or
heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Cycle Details: