Lan Adapter Specifications; Sound Specifications - Fujitsu DESKPOWER 6000/SS Series User Manual

Fujitsu laptop user manual
Hide thumbs Also See for DESKPOWER 6000/SS Series:
Table of Contents

Advertisement

*1:
Since the disk capacity specified in this manual is based on the conversions of 1MB = 1,000
actual capacity displayed on Windows using the conversions of 1MB = 1,024
specified in this manual.
Disk capacities are based on conversion of 1 MB = 1000
of 1 MB = 1024
2
bytes and 1 GB = 1024
Point
Note that the specifications of this PC may be revised without notice.

LAN adapter specifications

LAN controller
RAM for send/receive buffer
External interface
Transfer media
Transfer method
Access method
Data transfer speed
Wiring shape
Maximum segment length
Maximum number of nodes per segment
*1:
To appropriately run the network at 100Mbps, use a category 5 or higher unshielded twisted pair (UTP) cable. Data may be lost
if a category 3 or 4 cable is used.
*2:
The "hub unit" refers to a 100BASE-TX/BASE-T concentrator.
Point
The standard LAN of this PC automatically adapts to the speed of the connected network. After
the network speed is changed due to the replacement of hub units or other reasons, be sure to
use a cable of an appropriate data grade for the speed.

Sound specifications

Sound controller
PCM recording/playback
functions
2
bytes and 1 GB = 1000
3
bytes are displayed on Windows as smaller than those described on this manual.
Built-in Intel 82801BA (IHC2) + 82562EM
3KB each for sending and receiving
ISO8802-3 100BASE-TX/10BASE-T
Twisted pair cable
(100Mbps: Category 5, 10Mbps: Categories 3 to 5)
Base band
CSMA/CD
100Mbps, 10Mbps
Star shape
100m
Depends on the hub unit
Built-in Intel 82801BA I/O Controller Hub2 + Cirrus Logic CS4299
Sampling rate: 48 kHz maximum
16-bit Stereo
Simultaneous playback/recording function
2
bytes and 1GB = 1,000
2
bytes and 1GB = 1,024
3
bytes is smaller than that
3
bytes. Actual disk capacities based on conversion
*1
*2
3
bytes, the
63

Advertisement

Table of Contents
loading

Table of Contents