Troubleshooting - Haier L24T6 Owner's Manual

Troubleshooting

Carry out simple inspections for trouble-shooting. These tips may save you
time and money. Expenses incurred for installation of receiver and customer
control adjustments are not covered by warranty.
Symptoms
Ghost phenomena
Power failure
No image
Normal image but no
sound
Normal sound but poor
color
Poor image quality
Snowflakes and noise
Horizontal dotted line
Remote control fails
Items to be inspected and measures to be taken
* This may be caused by things blocking the antenna
such as high buildings and/or hills.
Use an adjustable high antenna, which may
improve image quality.
* Check whether the power cord of the TV set is
plugged into the outlet.
* Unplug the TV set, wait for 60 seconds and plug
the TV set in main outlet again and turn on the TV
set once again.
* Check the antenna connection at the back of the
TV set to see whether it is connected to the TV set
correctly.
* There may be some problem with the broadcasting
station. Try other channels.
* Adjust contrast and brightness settings.
* Turn up the volume
* Check whether the TV is set as mute, press the
corresponding button on the Remote control.
* Adjust contrast, color and brightness settings.
* When an S-VHS camera or camera connection is
enabled or it is connected to other peripheral units,
the image quality will be poorer. Turn off other
peripheral units for the moment.
* Check the antenna connection
* This may be caused by electronic interference
such as a hair dryer or nearby fluorescent tube.
* Turn off the device.
* Check whether the batteries are normal.
Replace them when necessary.
* Clean the lens of Remote control receiver on the
TV set.
* You may still use the front button on the TV set.
13