Playback Mode; Playing Back Tape - Panasonic NVGS330 Operating Instructions Manual

Playback mode

Playing back tape

≥Set to Tape Playback Mode.
(An operation icon automatically appears on
the LCD monitor.)
1
Operate with joystick.
1/;: Playback/Pause
6:
Rewind/Review playback (Reverts to
playback with the 1/; icon.)
5:
Fast forward/Cue playback (Reverts to
playback with the 1/; icon.)
∫:
Stop
≥The power will not turn off when the LCD
monitor and the viewfinder are closed and
retracted during Tape/Card playback mode.
≥During cue/review playback, fast-moving
images may show noise as a mosaic.
≥Before and after cue/review playback, the
screen may become black for a moment or
images may be disturbed.
40
VQT1L41
Playback mode
ª To adjust volume
Adjust the speaker volume for playback.
1
Move the [j
volume.
Towards [i]: increases the volume
Towards [j]: decreases the volume
(Nearer the bar to [i], larger the volume.)
≥On the remote control, press the [T] button to
increase the volume or the [W] button to
decrease it.
≥When the adjustment is completed, the volume
indication will disappear.
≥If you do not hear the sound, check the settings
of [SETUP] >> [12bit AUDIO].
ª
Repeat playback
When the tape end is reached, the tape will be
rewound and played back again.
1
Set [ADVANCED] >> [REPEAT PLAY] >>
[ON].
≥The [
cancel the repeat playback mode, set
[REPEAT PLAY] >> [OFF] or turn off the
power.)
≥When you set [USB FUNCTION] >> [WEBCAM]
and then connect the USB cable, the repeat
playback mode is cancelled.
ª
Settings on the audio
≥If you cannot listen to the desired audio when
playing back a tape, check the settings in
[SETUP] >> [12bit AUDIO].
≥When you record and dub the audio in [12bit]
and set [SETUP] >> [12bit AUDIO] >> [MIX], the
audio will be played back in stereo sound
regardless of the settings in [AUDIO OUT].
/VOLi] lever to adjust the
] indication appears. (In order to
VOL