Functions Cannot Be Used Simultaneously - Panasonic NVGS330 Operating Instructions Manual

with the USB cable connected to the movie
camera.
NO INK IN PRINTER:
There is no ink. Check the connected
printer.
NO PAPER IN PRINTER:
There is no paper. Check the connected
printer.
PRINTER ERROR:
Check the connected printer.
PC DOES NOT SUPPORT USB2.0:
The movie camera is connected to a
personal computer that does not support
USB 2.0.
-55-
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
CAN NOT OPERATE (MOTION DV MODE):
You are attempting to change [D.ZOOM]
setting during MotionDV Mode.
70
VQT1L41
Others
Functions cannot be used
simultaneously
Some functions in the movie camera are disabled
or cannot be selected due to its specifications.
The table below shows examples of functions
restricted by conditions.
Functions
≥Digital zoom
≥Fade
≥Backlight
compensation
≥Help mode
≥Recording
check
≥Blank search
≥Soft skin
≥Tele macro
≥Colour Night
View
≥Scene mode
≥Change of
white balance
≥Adjusting the
shutter speed,
iris/gain
≥Variable-speed
search
≥Deleting files
≥Formatting
≥Audio dubbing
Conditions which disable
the functions
≥When the Card Recording
mode is used
≥When the colour night
view function is used
≥When the iris/gain is set
≥While recording to a tape
≥While recording to a tape
≥When the Card Recording
mode is used
≥When setting the [AUTO/
MANUAL/FOCUS] switch
to [AUTO]
≥When the colour night
view function is used
≥When digital zoom (10k
or higher) is used
≥When the colour night
view function is used
≥When the colour night
view function is used
≥When the scene mode is
used
≥During repeat playback
≥When the write protect
switch on the card is set
to [LOCK]
≥When the file is protected
≥When the write protect
switch on the card is set
to [LOCK]
≥The section of a tape
recorded in LP mode
≥The blank section of a tape