Self-Timer Recording; Wide/4:3 Function - Panasonic NVGS330 Operating Instructions Manual

Self-timer recording

You can record still pictures on a card using the
timer.
≥Set to Card Recording Mode.
1
Press the joystick to display the icon. Move
the joystick down until icon 1 appears.
2
Move the joystick left to select the self-timer
recording icon [
≥The [SELF-TIMER ON] indication appears on
the screen of the movie camera.
3
Press the [ ] button.
≥After the [
] indication flashes for
approx. 10 seconds, recording will start. After
recording, the self-timer will be cancelled.
≥If you press the [
fully, the subject is focused when the button is
pressed halfway.
≥When you press the [
subject is focused just before recording.
ª To stop the timer midway through
Press the [MENU] button.
≥The self-timer standby mode is cancelled when
you turn off the power or operate the mode dial.
34
VQT1L41
].
1
] button halfway and then
] button fully, the
Record mode

Wide/4:3 Function

This allows you to record images compatible with
wide-screen TVs.
Wide Function
Images are recorded with a 16:9 aspect ratio.
4:3 Function
Images are recorded with a 4:3 aspect ratio.
≥Set to Tape/Card Recording Mode.
1
Wide Function
Set [BASIC] >> [REC ASPECT] >> [16:9].
4:3 Function
Set [BASIC] >> [REC ASPECT] >> [4:3].
ª To Cancel the Wide/4:3 Function
Wide Function
Set [BASIC] >> [REC ASPECT] >> [4:3].
4:3 Function
Set [BASIC] >> [REC ASPECT] >> [16:9].
≥The default setting is [16:9].
≥In the wide-screen mode, the menu screens,
operation icons and other screen displays
appear horizontally oriented.
≥When images are played back on a TV screen,
the date/time indication may be erased in some
cases.
≥Depending on the TV, the picture quality may
deteriorate.
≥If still pictures recorded with a 4:3 aspect ratio
are played back when [TV ASPECT] is set to
[16:9], part of the operation icons and other
displays will appear on the black bands on the
left and right of the picture.
≥Concerning the TV to be connected and TV
used for playback.
≥When playing back images taken by this unit
on a TV screen, change the setting
established by Tape/Card playback mode
[SETUP] >> [TV ASPECT] to match the
aspect ratio (4:3 or 16:9) of the TV monitor to
be connected. (
≥Depending on the settings of the TV
connected, the images may not be displayed
properly. For more information, please read
the operating instructions for the TV.
)
-42-