Panasonic NVGS330 Operating Instructions Manual page 59

With DV cable (optional)
1
Set the movie camera to tape recording
mode or tape playback mode.
≥You cannot use SweetMovieLife in tape
recording mode.
2
Connect the movie camera to personal
computer with auxiliary DV cable.
1)
2)
1) DV cable
2) DV terminal
3
Select [start] >> [All Programs (Programs)]
>> [Panasonic] >> [SweetMovieLife 1.1E]/
[MotionDV STUDIO 6.0E LE for DV] >>
[SweetMovieLife]/[MotionDV STUDIO LE for
DV].
With a PC
1.1
6.0
ª Using the movie camera as a Web
Camera
(Windows Vista, Windows XP SP1/
SP2, Windows 2000 SP4)
To upgrade Windows XP to SP2, click [start] >>
[All Programs (Programs)] >> [Windows Update].
If the movie camera is connected to your personal
computer, you can send video and sound from
the movie camera to the other parties via the
network. Audio may also be exchanged if the
personal computer is configured accordingly.
(You can use the microphone equipped with the
personal computer instead of the one on the
movie camera.)
≥Refer to page
for the minimum
-54-
requirements.
Connecting the movie camera to personal
computer (For using as a Web Camera)
1
Install USB Driver. (
2
Set the movie camera to tape playback
mode or tape recording mode.
3
Set [BASIC] or [ADVANCED] >>
[USB FUNCTION] >> [WEBCAM].
4
Connect the movie camera to personal
computer with auxiliary USB cable.
1)
2)
1) USB cable
2) USB terminal
3) The Web Camera mode screen
≥Do not use any other USB connection cables
except the supplied one. (Operation is not
)
-54-
3)
VQT1L41
59