Toll Save Mode - Dell 1600n Multifunction Mono Laser Printer User Manual

NOTE: You can adjust the speaker volume only when the telephone line is connected.
1. Press <On Hook Dial>. A dial tone sounds from the speaker.
2. Press the scroll button ( or
volume level.
3. Press <On Hook Dial> to save the change and return to Standby mode.

Toll Save Mode

The Toll Save mode can be used to save scanned documents for transmission at a specified time in order to
take advantage of lower long distance rates.
To turn the Toll Save mode on:
1. Press <Menu> until "Advanced Fax" appears on the top line of the display.
2. Press the scroll button ( or
3. Press the scroll button ( or
4. Press <Select> when "Start Time" displays on the bottom line.
5. Enter the time and date when your multi-function printer starts sending toll save faxes, using the
number keypad.
To select "AM" or "PM" for 12-hour format, press the
6. Press <Select> when the starting time on the display is correct.
7. Press the scroll button (
8. Enter the time and date when the toll save transmission ends, using the number keypad.
9. Press <Select> to save the setting.
10. To return to Standby mode, press <Return>.
Once Toll Save mode is activated, your multi-function printer stores all of the documents to be faxed into its
memory and sends them at the programmed time.
To turn Toll Save mode off, follow steps 1 and 2 above and then press the scroll button ( or
displays at the bottom line and press <Select>.
) until you hear the loudness you want. The display shows the current
) until you see "Toll Save"on the bottom line and press <Select>.
) until "On" displays on the bottom line and press <Select>.
or ) to display "End Time" and press <Select>.
or the button.
) until "Off"