Integrated Peripherals - Gigabyte GA-M52LT-D3 User Manual

2-6

Integrated Peripherals

On-Chip IDE Channel
NV SATA Controller
IDE Prefetch Mode
 Serial-ATA RAID Config
Onboard Audio Function
On-Chip MAC Lan
Onboard LAN Boot ROM
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
USB Controllers
USB Legacy Function
USB Storage Function
higf : Move Enter: Select
F5: Previous Values
On-Chip IDE Channel
Enables or disables the integrated IDE controller. (Default: Enabled)
NV SATA Controller
Enables or disables the integrated SATA controller. (Default: Enabled)
IDE Prefetch Mode
Enables or disables prefetch mode for the integrated IDE controller. Enabled activates the IDE prefetch
buffer to enhance hard drive performance. (Default: Enabled)
Serial-ATA RAID Config
NV SATA RAID function
x NV SATA 1 Primary RAID
x NV SATA 1 Secondary RAID
higf : Move Enter: Select
F5: Previous Values
NV SATA RAID function
Enables or disables RAID for the integrated SATA 3Gb/s controller. Enabled allows you to configure
RAID for individual SATA channel. (Default: Disabled)
NV SATA 1 Primary RAID
Enables or disables RAID for the first channel of the integrated SATA 3Gb/s controller. This item is con-
figurable only if the NV SATA RAID function item is set to Enabled. (Default: Enabled)
BIOS Setup
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Serial-ATA RAID Config
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Enabled]
[Enabled]
[Enabled]
[Press Enter]
[Auto]
[Auto]
[Disabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
[Enabled]
[Enabled]
[Enabled]
F10: Save
[Disabled]
Enabled
Enabled
F10: Save
- 40 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults