System Memory; Supported Memory Configurations - Intel D53427RKE Specification

1.4

System Memory

The board has two 204-pin SO-DIMM sockets and supports the following memory
features:
1.5 V DDR3 SDRAM SO-DIMMs with gold plated contacts
•
Support for 1.35 V Low Voltage DDR3 (new JEDEC specification)
•
Two independent memory channels with interleaved mode support
•
• Unbuffered, single-sided or double-sided SO-DIMMs
16 GB maximum total system memory (with 4 Gb memory technology). Refer to
•
Section 2.1.1 on page 41 for information on the total amount of addressable
memory.
Minimum recommended total system memory: 1024 MB
•
• Non-ECC SO-DIMMs
Serial Presence Detect
•
DDR3 1600 MHz and DDR3 1333 MHz SDRAM SO-DIMMs
•
NOTE
To be fully compliant with all applicable DDR SDRAM memory specifications, the board
should be populated with SO-DIMMs that support the Serial Presence Detect (SPD)
data structure. This allows the BIOS to read the SPD data and program the chipset to
accurately configure memory settings for optimum performance. If non-SPD memory
is installed, the BIOS will attempt to correctly configure the memory settings, but
performance and reliability may be impacted or the SO-DIMMs may not function under
the determined frequency.
Table 4 lists the supported SO-DIMM configurations.
Table 4. Supported Memory Configurations
SO-DIMM
Capacity Configuration
1024 MB SS
2048 MB DS
2048 MB SS
4096 MB DS
4096 MB SS
8192 MB DS
Note: "DS" refers to double-sided memory modules (containing two rows of SDRAM) and "SS" refers to
single-sided memory modules (containing one row of SDRAM).
For information about...
Tested Memory
SDRAM SDRAM Organization
(Note)
Density Front-side/Back-side
1 Gbit 128 M x8/empty
1 Gbit 128 M x8/128 M x8
2 Gbit 256 M x8/empty
2 Gbit 256 M x8/256 M x8
4 Gbit 512 M x8/empty
4 Gbit 512 M x8/512 M x8
Refer to:
http://support.intel.com/support/motherboards/desktop/sb
/CS-025414.htm
Product Description
Number of SDRAM
Devices
8
16
8
16
8
16
19