Dell PowerConnect B-RX Configuration Manual page 1415

Commands
copy <from-card> <to-card>
[/<from-dir-path>/]<from-name>
[/<to-dir-path>/][<to-name>]
copy slot1 | slot2 flash [/<from-dir-path>/]<from-name>
monitor | primary | secondary
copy flash slot1 | slot2 <source-name> monitor | primary
| secondary | startup-config [<dest-name>]
copy flash flash monitor standby
copy flash flash primary [standby]
copy flash flash secondary [standby]
copy flash lp <source-file> <dest-file> <slot-number> | all
copy flash tftp <ip-addr> <dest-file-name> primary |
secondary
copy slot1 | slot2 tftp <ip-addr>
[/<from-dir-path>/]<source-file> [<dest-file>]
copy tftp slot1 | slot2 <ip-addr>
[/<from-dir-path>/]<source-file> <path-name> | monitor
| primary | secondary
copy slot1 | slot2 startup-config
[/<from-dir-path>/]<file-name>
copy startup-config slot1 | slot2
[/<to-dir-path>/]<to-name>
copy startup-config tftp <ip-addr>
[/<to-dir-path>]<to-name>
copy tftp startup-config <ip-addr>
[/<from-dir-path>]<from-name>
copy running-config slot1 | slot2
[/<to-dir-path>/]<to-name>
copy slot1 | slot2 running-config
[/<from-dir-path>/]<from-name>
copy tftp running-config <ip-addr>
[/<from-dir-path>/]<from-name> [overwrite]
cp [<source-dir-path>]<source-file-name>
[<dest-dir-path>]<dest-file-name>
boot system slot1 | slot2 [/<dir-path>/]<file-name>
boot system tftp <ip-address> <file-name>
boot system flash secondary
boot system slot1 <file-name> | slot2 <file-name> | flash
secondary | tftp <ip-address> <file-name> | bootp
BigIron RX Series Configuration Guide
53-1001986-01
Redundant management module
See ...
"Copying files using the copy command"
"Copying files between a flash card and flash
memory" on page 52
"Copying files between a flash card and a TFTP
server" on page 53
"Copying software images between active and
standby management modules"
"Copying software images between active and
standby management modules"
"Copying software images between active and
standby management modules"
"Copying files from a management module to an
interface module" on page 53
"Copying RX Series IronWare images from flash
memory to a TFTP server" on page 53
"Copying files between a flash card and a TFTP
server" on page 53
"Copying files between a flash card and a TFTP
server" on page 53
"Copying the startup-config file between a flash card
and flash memory" on page 54
"Copying the startup-config file between a flash card
and flash memory" on page 54
"Copying the startup-config file between flash
memory and a TFTP server" on page 54
"Copying the startup-config file between flash
memory and a TFTP server" on page 54
"Copying the running-config to a flash card or a TFTP
server" on page 55
"Loading a running-config from a flash card or a TFTP
server" on page 55
"Loading a running-config from a flash card or a TFTP
server" on page 55
"Copying files using the cp command"
"Rebooting from the system" on page 57
"Rebooting from the system" on page 57
"Rebooting from the system" on page 57
"Configuring the boot source for future reboots"
page 57
E
on page 51
on page 52
on page 52
on page 52
on page 55
on
1343