Dell PowerConnect B-RX Configuration Manual page 1233

BigIron RX# show ipv6 bgp neighbor 2000:4::110 routes-summary
1
Routes Accepted/Installed:0,
Routes Selected as BEST Routes:0
Unreachable Routes (no IGP Route for NEXTHOP):0
History Routes:0
NLRIs Received in Update Message:0,
NLRIs Discarded due to
Routes Advertised:2,
NLRIs Sent in Update Message:2,
Peer Out of Memory Count for:
Receiving Update Messages:0, Accepting Routes(NLRI):0
Attributes:0, Outbound Routes(RIB-out):0 Outbound Routes Holder:0
Syntax: show ipv6 bgp neighbor [<ipv6-address>] routes-summary
This display shows the following information:
TABLE 203
s
This field...
IP Address
Routes Received
Routes Selected as BEST Routes
BEST Routes not Installed in IPv6
Forwarding Table
Unreachable Routes
History Routes
NLRIs Received in Update Message
BigIron RX Series Configuration Guide
53-1001986-01
IP Address: 2000:4::110
BEST Routes not Installed in IP Forwarding Table:0
Maximum Prefix Limit:0, AS Loop:0
Invalid Nexthop:0, Invalid Nexthop Address:0.0.0.0
Duplicated Originator_ID:0, Cluster_ID:0
To be Sent:0,
BGP4+ neighbor route summary information
Displaying BGP4+ information
Filtered/Kept:0, Filtered:0
Withdraws:0 (0),
To be Withdrawn:0
Withdraws:0, Replacements:0
Displays...
The IPv6 address of the neighbor
How many routes the switch has received from the neighbor during the
current BGP4+ session.
•
Accepted/Installed – Indicates how many of the received routes the
switch accepted and installed in the BGP4+ route table.
•
Filtered/Kept – Indicates how many routes were filtered out, but
were nonetheless retained in memory for use by the soft
reconfiguration feature.
•
Filtered – Indicates how many of the received routes were filtered
out.
The number of routes that the switch selected as the best routes to their
destinations.
The number of routes received from the neighbor that are the best
BGP4+ routes to their destinations, but were nonetheless not installed
in the IPv6 route table because the switch received better routes from
other sources (such as OSPFv3, RIPng, IPv6 IS-IS, or static IPv6 routes).
The number of routes received from the neighbor that are unreachable
because the switch does not have a valid RIPng, OSPFv3, or static IPv6
route to the next hop.
The number of routes that are down but are being retained for route flap
dampening purposes.
The number of routes received in Network Layer Reachability (NLRI)
format in UPDATE messages.
•
Withdraws – The number of withdrawn routes the switch has
received.
•
Replacements – The number of replacement routes the switch has
received.
Replacements:0
45
1161