Inbound Filter - TRENDnet TEW-813DRU User Manual

TRENDnet User's Guide
Block all services
1. Log into your router management page (see
on page 9).
2. Click on Advanced and click on Security, then click on Access Control.
3. Next to Enable Access Control, click the Enable option.
4. Review the Add All Services Block Rule. Click Add to save the rule.
• Rule Enable – Checking this option turns on the Protocol/IP Filter and
unchecking turns it off.
• Rule Name – Enter a name for the Protocol/IP Filter.
•
Schedule (Optional) – The schedule function allows you to define a schedule
when the access control filter should be turned on. To define a new schedule,
click New Schedule and refer to page 34 "
created a new schedule, click the drop-down list and the new schedule will be
available for selection. Note: Before applying scheduling, please ensure your
Time settings are configured correct and you have defined a schedule. See page
33 to configure Time Settings
schedule.
•
Client IP Address Range – Enter the IP address or IP address range to apply the
protocol/IP filter. (e.g. 192.168.10.20-192.168.10.20 or 192.168.10.20-
192.168.10.30).
Note: The filter will not be applied to IP addresses outside of the range specified.
Note: In the Block Rule List, you can edit a rule by clicking
next to the rule you would like to edit. You can also delete a rule by clicking
the Delete column next to the rule you would like to delete.
© Copyright 2014 TRENDnet. All Rights Reserved.
"Access your router management
Create Schedules". After you have
and see page 34 " Create Schedules" to create a
under the Edit column

Inbound Filter

Advanced > Security > Inbound Filter
page"
Inbound Filters allows you to allow or deny a specific range of IP addresses. You can
create a predefined range of IP addresses to apply to a specific feature.
Note: You can apply a predefined inbound filter to the following features:
• Virtual Server
•
Gaming
• Remote Management
1. Log into your router management page (see
on page 9).
2. Click on Access, and click on Inbound Filter.
3. Review the inbound filter settings. Click Add to save the Inbound Filter.
• Filter Name – Enter a name for the IP address range.
• Filter Action – Select Allow to allow the specified IP address range or Deny to
deny the specified IP address range.
• IP Address - Enter the IP address (e.g. 192.168.1.20-192.168.1.30).
under
Note: In the Inbound Filter List, you can edit a rule by clicking
column next to the rule you would like to edit. You can also delete a rule by clicking
under the Delete column next to the rule you would like to delete.
TEW-813DRU
"Access your router management page"
under the Edit
36