Troubleshooting; Please Do Not Return This Product To The Store - Bissell PowerGlide® Pet Vacuum 1044 User Manual

T
roubleshooting
Vacuum cleaner won't run
possible causes
1. Power cord not plugged in
2. Blown fuse/tripped breaker in home
3. Damaged power cord
Vacuum cleaner and tools won't pick up dirt
possible causes
1. Incorrect height adjustment
2. Hose not attached to suction opening
3. Twist 'n Snap hose not securely attached
4. Crack or hole in hose
5. Broken or worn drive belt
6. Rotating floor brush bristles worn
7. Rotating floor brush jammed
8. Clog in vacuum
9. Dirt container full
10. Dirt container not installed properly
11. Filters are dirty
12. Pet TurboBrush Tool is clogged or debris is wrapped
Vacuum cleaner is difficult to push
possible causes
1. Incorrect height setting
Visible dirt escaping from cleaner
possible causes
1. Dirt container full
2. Filters missing or installed incorrectly
3. Dirt container installed incorrectly
other maintenance or service not included in the manual should be
performed by an authorized service representative.

please do not return this product to the store.

for any questions or concerns, bissell is happy to be of service.
w w w . b i s s e l l . c o m
thank you for selecting a bissell product.
contact us directly at 1-800-237-7691.
WaRning:
To reduce the risk of electric shock, turn
power OFF and disconnect polarized plug
from electrical outlet before performing
maintenance or troubleshooting.
Remedies
1. Check electrical plug
2. Check/replace fuse or reset breaker
3. Unplug, check for damage, replace
as necessary
Remedies
1. Adjust powerfoot to correct height
2. Firmly push hose wand into hose
wand base
3. Make sure Twist 'n Snap hose is snapped
into locked position
4. Check hose and replace if needed
5. Replace drive belt, see page 13
6. Replace brush
7. Remove brush and clean debris from
brush ends
8. Clear clogs, see page 15
9. Empty dirt container
10. Position correctly and lock in place
11. Check pre-motor and post-motor filters
12. See page 14 for Maintaining Pet TurboBrush Tool
Remedies
1. Adjust powerfoot to correct height setting
Remedies
1. Empty dirt container
2. Check pre-motor and post-motor filters for
correct installation
3. Pull out and re-insert dirt container correctly
8 0 0 . 2 3 7 . 7 6 9 1
17