Height Adjustment; Handle Positions - Bissell PowerGlide® Pet Vacuum 1044 User Manual

O
perations

handle positions

Press the handle release pedal, located on
the lower left side of the vacuum, with your
foot to place your vacuum into one of three
cleaning positions.
1. upright – For storage and above
floor cleaning with tools.
2. normal cleaning – Press handle
release pedal once. Position used for
most household floor cleaning tasks.
3. low cleaning – With the vacuum
in normal cleaning position, press
handle release pedal again. Use for
reaching under low furniture such as
tables, chairs or beds.

height adjustment

The powerfoot/rotating floor brush on your
vacuum can be adjusted to clean several
floor surfaces.
note: for optimal cleaning
performance, adjust to the
lowest practical setting. if your
cleaner is difficult to push, adjust
to the next higher setting.
1. Turn height adjustment knob to
desired setting.
bare floor
For non-carpeted, indoor surfaces
lowest setting
For short pile carpets
Medium setting
For short and medium pile carpets
highest setting
For plush pile carpet
w w w . b i s s e l l . c o m
1.
Tip:
Before cleaning under low furniture,
check area first for objects that might
harm the unit or block the vacuum hose.
1.
Height Adjustment Knob
8 0 0 . 2 3 7 . 7 6 9 1
2.
3.
7