Basic Operations; Turning The Power On And Stand-By; Adjusting The Volume - Fujitsu Plasmavision P42HTA51E Series User Manual

BASIC OPERATIONS

TURNING THE POWER ON AND STAND-BY

* You can also use the buttons
on the display's control
panel to perform these steps.

ADJUSTING THE VOLUME

* You can also use the buttons
on the display's control
panel to perform these steps.
Note
• Functions may not be available with some models and some device options.
E-12
1
Press OFF/ON
BY state.
The power lamp lights up.
2
Press on the remote control.
The color of the power lamp changes from "Red" to "Green".
3
Press , the button of the channel you want to watch, and then
press or
Select TV or the picture mode to input.
4
Press when the power is ON.
The color of the power lamp changes from "Green" to "Red" and the display goes into standby
state.
Adjusting the volume
Press to increase the volume.
Press to reduce the volume.
* Note that the volume level remains stored even when you
turn OFF the power.
Muting the audio
Press .
The audio is removed.
Press again to restore the audio to the original level.
The mute mode can also be released by pressing the volume
buttons.
to the left at the bottom of the display to the STD-
.
When the volume adjustment button is
pressed