Adjusting Audio; Treble; Bass; Balance - Fujitsu Plasmavision P42HTA51E Series User Manual

ADJUSTING AUDIO

• You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-19 for the basic operation procedures.
• The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
• When the optional speaker is not installed, sound is not output.

Treble

Press to make adjustments.
: Stronger treble
: Weaker treble
Press to store.

Bass

Press to make adjustments.
: Stronger bass
: Weaker bass
Press to store.

Balance

Press to make adjustments.
: Shifts the volume balance towards the right.
: Shifts the volume balance towards the left.
Press to store.

Loudness

Corrects the balance between bass and treble for easy listening even with weak volume.
Each time you press or
On Off
Press to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
• AUDIO menu will not be displayed when "No Audio" is selected. (See P. E-27.)
, one of the available choices appears in the following sequence:
AUDIO Menu screen
E-23