Direct Setting; Code Setting; White Screen; Background - Fujitsu Plasmavision P42HTA51E Series User Manual

OTHER ADJUSTMENTS (Continued)
(6) Press to store.
* When the Screen Orbiter function is operated, some letters at the top, bottom, right or left of the screen may be missed.

Direct Setting

You can use this option to switch the setting for RGB input signal.
Each time you press or
Auto VGA
[Auto]: The optimum display is obtained automatically for input signals.
[Others]: The optimum resolution setting is fixed for each signal.
Press to store.
* In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA
Switch to the fixed display when the image is not displayed properly.
* Signals that are not applicable depending on the model or input terminals may not be displayed.

Code Setting

Normally, use this option in Auto mode.

White Screen

You can use this option to display white over the entire screen to minimize phosphor burn-in.
Each time you press or
Off On
Press to store.

Background

When the screen size was set to "Normal", to reduce "burn-in", the brightness of the part at which left and right images are not displayed
can be set. Normally, we recommend that "Light Gray" be used.
Each time you press or
Black Dark Gray
Press to store.
* Burn-in can still occur if the Normal mode is shown for extended periods.

Information

Displays system operation status.
Select "Information" and press
The "Information" screen will appear.
[Mode]:
[Freq. Scan Mode]: Frequency scanning
[Input Signal]:
[Input Sync]:
[Freq.]:
[Preset No.]:
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-28
, one of the available choices appears in the following sequence:
WVGA 480P XGA
, one of the available choices appears in the following sequence:
, the settings is switched.
Light Gray
.
Input mode appears at the upper right corner of the screen
Video mode
Signal type
Synchronized signal frequency, polarity
RGB code number
WXGA SXGA SXGA
+
+
may not be automatically distinguished.
Status Display Screen
(TV Mode)
for RGB
for RGB