Lenovo ThinkServer TS430 User Manual page 125

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Use any documentation that comes with the TR 100 key and follow those instructions in addition to
the instructions in this topic.
To remove the TR 100 key, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See "Removing the server cover" on page 87.
3. Lay the server on its side for easier operation.
4. Locate the iButton socket on the system board. Open the retaining clip
release the TR 100 key and then completely remove the key from the iButton socket.
Note: If necessary, remove any parts or disconnect any cables that might impede your operation.
Figure 54. Removing the TR 100 key
5. If you are instructed to return the old TR 100 key, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
1 on the iButton socket to
.
Chapter 6 Installing, removing, or replacing hardware
113