Installing, Removing, Or Replacing Hardware; Installing Or Removing A Memory Module - Lenovo ThinkServer TS430 User Manual

Machine type: 0387, 0388, 0389, 0390, 0391, 0392, 0393 and 0441
Hide thumbs Also See for ThinkServer TS430:
Table of Contents

Advertisement

5. Go to "Completing the parts replacement" on page 170.

Installing, removing, or replacing hardware

This topic provides instructions on how to install, remove, or replace hardware for your server. You can
expand the capabilities of your server by adding new hardware devices, such as memory modules, PCI
cards, or other server options, and maintain your server by replacing the failing hardware devices.
If you are handling a server option, refer to the appropriate installation and or removal instructions in this
topic along with the instructions that come with the option.
Notes:
1. Use only parts provided by Lenovo.
2. Depending on the model, your server might look slightly different from the illustrations in this topic.

Installing or removing a memory module

This topic provides instructions on how to install or remove a memory module.
For a list of the ThinkServer memory module options, go to http://www.lenovo.com/thinkserver. Click the
Products tab and then click Options ➙ ThinkServer Memory to view the information.
Note: The memory modules are extremely sensitive to ESD. Make sure that you read and understand
"Handling static-sensitive devices" on page 86 first and carefully perform the operation.
Memory module installation rules
Your server has four memory slots for installing or replacing DDR3 UDIMMs with ECC technology.
• Supports 2 GB, 4 GB, and 8 GB 1333 MHz DDR3 UDIMMs
• Single-rank or dual-rank
• Minimum system memory: 2 GB (only one 2 GB memory module installed in the DIMMA2 slot)
• Maximum system memory: 16 GB (one 4 GB memory module installed in each of the four memory slots)
94
ThinkServer TS430 User Guide

Advertisement

Table of Contents
loading

Table of Contents